Wireless control of a Raymarine autopilot transforms how you sail. Whether you are sailing solo, reefing at the mast, or anchoring from the foredeck, a wireless autopilot remote allows you to adjust course without returning to the helm.
This guide explains what a Raymarine autopilot remote is, what options are available, and how modern wireless solutions work with SeaTalk systems.
- Control your Raymarine autopilot from anywhere on board
- Ideal for solo and short-handed sailing
- No modification to existing SeaTalk systems
- Works alongside your existing control head
What Is a Raymarine Autopilot Remote?
A Raymarine autopilot remote allows you to engage, disengage, and adjust course commands without physically touching the autopilot control head. This is particularly useful when moving around the cockpit, working at the mast, anchoring, or sailing alone.
Many older Raymarine and Autohelm systems using SeaTalk were designed before wireless control became common, which is why owners often look for aftermarket solutions.
Existing Options for Raymarine Autopilot Remote Control
DIY Remote Control Projects
DIY projects using microcontrollers can offer basic remote functionality, but they typically require soldering, programming, custom enclosures, and ongoing maintenance. Support and reliability depend entirely on the builder.
Legacy or Discontinued Remotes
Some official Raymarine remotes exist for specific systems, but many are discontinued, expensive, or incompatible with older SeaTalk autopilots.
Modern Wireless Controllers
Modern wireless controllers provide a supported, plug-and-play alternative without requiring any modification to the autopilot hardware.
The Nauti-Control Wireless Autopilot Remote
The Nauti-Control ST Wireless Controller is designed specifically for Raymarine and Autohelm autopilots using SeaTalk. It provides reliable wireless control without soldering, firmware flashing, or permanent modification.
- Designed for Raymarine SeaTalk systems
- Supplied fully built and tested
- Wireless handheld remote included
- Mobile phone control supported
- Apple Watch and Android Wear support
- Firmware upgradable for future features
Learn more: Choosing Between the Nauti-Control ST Wireless and N2K Wireless Modules
Supported Raymarine and Autohelm Autopilots
- Raymarine ST1000 and ST2000
- ST4000, ST5000, and ST6000 series
- Autohelm SeaTalk autopilots
- EV-series systems with
If you are unsure whether your system is compatible, you can get in touch before ordering.
How the Wireless Autopilot Remote Works
The controller connects directly to the SeaTalk bus and listens for autopilot commands. Wireless inputs from the remote, phone, or watch are translated into standard SeaTalk messages, just like commands from a wired control head.
Your existing controls continue to work normally, and no changes are made to the autopilot hardware.
Real-World Use Cases
- Solo sailors adjusting sails while maintaining course
- Reefing at the mast without leaving the autopilot unattended
- Anchoring and manoeuvring from the foredeck
- Motoring while controlling course from inside the cabin
Frequently Asked Questions
Does this replace my existing autopilot control head?
No. Your existing control head remains fully functional. The wireless remote works alongside it.
Is this suitable for older Raymarine autopilots?
Yes. It is specifically designed for SeaTalk-based systems, including older Autohelm units.
Can I use my phone or watch instead of the remote?
Yes. Mobile apps and smartwatch support are included.
Looking for a Reliable Raymarine Autopilot Remote?
If you want a supported, plug-and-play wireless remote for your Raymarine or Autohelm SeaTalk autopilot, the Nauti-Control ST Wireless Controller was built specifically for this purpose.
Leave a Reply
You must be logged in to post a comment.