Description
The Nauti-Control N2K Wireless module brings Wi-Fi connectivity and remote autopilot control to your NMEA 2000 / SeaTalk NG network, giving you full access to live data and steering functionality — all without messy cabling.
Built to integrate seamlessly with both modern NG systems and older SeaTalk networks (via adapter), it’s a plug-and-play upgrade for boat owners wanting a mobile-ready bridge into their vessel’s data backbone.
Once connected, the N2K Wireless broadcasts real-time NMEA 2000 data to compatible apps such as Signal K, OpenCPN, and other marine monitoring platforms. It also adds wireless autopilot control, letting you steer, adjust, or switch modes using the supplied remote or directly from your Nauti-Control mobile or smartwatch apps.
Each unit includes a dedicated 4-button remote providing precise control of key autopilot functions:
- Auto / Standby – engage or disengage the pilot
- +1 / −1 and +10 / −10 – fine or coarse course adjustments
- Track / Wind mode – switch between navigation tracking and wind-based steering (where supported)
Compatible with the Nauti-Control mobile apps for iOS and Android, as well as Wear OS and watchOS smartwatches, you can monitor live NMEA 2000 data and control your autopilot directly from your phone or wrist — ideal for single-handed sailing or when away from the helm.
Key Features
- Wireless autopilot control via included 4-button remote (Auto, Standby, ±1°, ±10°, Track, Wind)
- Full compatibility with NMEA 2000 and SeaTalk NG networks
- App integration: works with Nauti-Control iOS / Android / Wear OS / watchOS apps
- Supports modern Raymarine NG autopilots, including:
EV-100, EV-150, EV-200, EV-300, EV-400, p70 / p70R / p70s control heads - Supports legacy SeaTalk autopilots (with Raymarine SeaTalk-to-SeaTalk NG adapter), including:
ST1000, ST2000, ST4000, ST5000, ST6000, ST7000, ST8000, ST10000 series - Wireless data streaming of depth, heading, wind, GPS, and more to mobile devices and onboard displays
- Easy plug-and-play installation — no soldering or configuration required
- Firmware-upgradable for future enhancements
- Low power draw and compact form factor
- Cost-effective alternative to traditional wired gateways
Technical Specifications
| Parameter | Value |
|---|---|
| Input Voltage | 9–16 V DC (standard NMEA 2000 / SeaTalk NG bus) |
| Current Draw | < 100 mA typical |
| Connectivity | 2.4 GHz Wi-Fi (Access Point & Client modes) |
| Network Interface | Standard NMEA 2000 / SeaTalk NG connector |
| Protocols Supported | NMEA 2000, SeaTalk NG, Signal K |
| Dimensions | 85 mm × 55 mm × 25 mm |
| Mounting | Bulkhead or flat surface |
| Operating Temperature | −10 °C to +50 °C |
Notes & Considerations
- For older SeaTalk-1 systems, use a Raymarine SeaTalk-to-SeaTalk NG adapter for full compatibility.
- Each unit is hand-assembled and tested; minor cosmetic variation may occur.
- Supplied “as is”: no express or implied warranty beyond standard consumer protection.
Ideal For
- Boat owners upgrading Raymarine or NMEA 2000 systems with wireless autopilot control and Wi-Fi data access
- Monitoring and controlling autopilot, GPS, depth, and wind data via mobile or smartwatch apps
- Replacing expensive wired network bridges with a lightweight, future-proof wireless alternative
Bring your boat’s autopilot and instruments into the digital age with the Nauti-Control N2K Wireless — reliable, mobile-focused, and built to keep you connected and in command wherever you sail.
Reviews
There are no reviews yet.